חיפוש מוצרים

מפרטים להורדה

משאבות סיחרור מיזוג אויר

Description
Pumping of water or other liquids that are non aggressive non explosive and free of solid or fibre particles.
Specially suitable for pumping of glycol water mix for air conditioning systems.
VERSATILE: thanks to the use of the MCE 22/C inverter performance is such as to allow automatic adaptation to
meet the various system requirements, while maintaining constant differential pressure; also, thanks to the top
quality construction materials and generously sized motors, the series KCE and KCVE can be used with a glycol
percentage of 40% in the pumped liquid.

RELIABLE: all components have been sized to guarantee a lifetime of at least 50,000 operating hours (with
the exception of the bearings and mechanical seals guaranteed by the manufacturer for an average lifetime
of 25,000 operating hours in heavy-duty operating conditions

RUST-PROOF: all components in contact with the liquid are constructed in thermoplastic material (polypropylene
or reinforced noryl) and the pump shaft in stainless steel (AISI 304)
FLEXIBLE: possibility of rotating the pump body through steps of 90° to increase flexibility of installation.Hydraulic
assembly (pump, body, seal support flange, impeller diffuser) in fibre glass reinforced technopolymer, extension
of shaft in contact with liquid in AISI 304 stainless steel.

Features

  • Mechanical seal in silicon carbide/graphite, O-rings in
  • EPDM. Asynchronous motor, continuous duty with external
  • ventilation (S1), 2-pole.
  • Watertight ball bearings, resistant to water and humidity.
  • Motor construction according to EN 60335-2-41 standards
  • Operating range: from 3 to 45 m3/h
  • Maximum head: 24 m
  • Liquid temperature range: from -10 to +55°C
  • Pumped liquid: clean, free of solid or abrasive substances,
  • chemically neutral, close to the characteristics of waterMax.
  • ambient temperature: +40°C
  • Maximum glycol percentage: up to 40%
  • Massima pressione di esercizio: 6.5 bar
  • Motor protection rating: IP 55
  • Insulation class: F (copper wire to insulation class H)
  • Voltage as standard:
  • single phase 1x220-240 V / 50-60 Hz
  • Special version available on request:
  • three-phase 3x400 V / 50 Hz or 
עבור לתוכן העמוד